FRF1GY
 |
Furniture Feed Service Fitting:
Flush service fitting used with Hubbell PT71SD
(single-service). These single-service furniture feed flush poke-throughs are offered as one-piece units (complete with flush service fitting and through-floor fitting), or as two-piece units (flush service fitting and through-floor fitting ordered separately). |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Poke-Through Style | 
|
| Type | Furniture Feed Flush |
| Item | Flange and Cover Only |
| Flange and Cover Type | Single Service Furniture Feed |
| Color |  |
| Power Wiring Capacity | Power: Up to six #12 AWG, and two #10 AWG type THHN wires or up to ten #12 AWG type THHN wires OR |
| Voice/Data Wiring Capacity | Voice/Data: Up to 100 #22 AWG telephone/data conductors (or two 25 pair telephone cables). |
| Rule of Thumb | Any combination of wire that does not exceed .06 sq. in. of total allowable copper cross-sectional area is acceptable. |
| UL Installation Spacing | Minimum of 2 feet O.C. and not more than one unit per each 65 sq. ft. of floor area in each span. |
| Cored Hole | 3" (76.2) diameter |
| Device Cover and Flaps Material | Painted Aluminum |
| Outlet Box UL Listing | E31999 |
| Fire Resistance UL Listing | R8429 |
| Style | Flush |
| Product Information | |
|---|---|
|
• Aluminum conduit cover with 1.109 inch knockout to accept a ¾" flexible metal conduit connector. • Finish: Epoxy paint (gray or ivory). |
| Applications Data | |
|---|---|
|
Mounted in core drilled 3" (76.2) diameter hole through the concrete floor. Floor thickness range: 2 1/4" to 7" (57.2 to 177.8). UL Listed for fire resistance in 1-4 hour rated floors. |
 |
